Retrogradation inhibition of starches in staple foods with maltotetraose-forming amylase.

To effectively inhibit the retrogradation of staple foods, the effects of maltotetraose-forming amylase(G4-amylase) on the short and long-term retrogradation of different staple starches such as rice starch (RS), wheat starch (WS), potato starch (PS) were studied. The results indicated that G4-amylase decreased the content of amylose. Amylose contents (21.09%) of WSG4 were higher than that (14.82%) of RSG4 and (13.13%) of PSG4. WS had the most obvious change in the chain length distribution of amylopectin. A chains decreased by 18.99% and the B1 chains decreased by 12.08% after G4-amylase treatment. Compared to RS (662 cP) and WS (693 cP), the setback viscosity of RSG4 (338 cP) and WSG4 (385 cP) decreased. Compared to RS (0.41), WS (0.45), and PS (0.51), the long-term retrogradation rate of RSG4 (0.33), WSG4 (0.31), and PSG4 (0.38) significantly reduced. It indicated that G4-amylase significantly inhibited the long-term retrogradation of WS, followed by RS and PS.

Investigating the effect of SUMO fusion on solubility and stability of amylase-catalytic domain from Pyrococcus abyssi.

Alpha amylase belonging to starch hydrolyzing enzymes has significant contributions to different industrial processes. The enzyme production through recombinant DNA technology faces certain challenges related to their expression, solubility and purification, which can be overcome through fusion tags. This study explored the influence of SUMO, a protein tag reported to enhance the solubility and stability of target proteins when fused to the N-terminal of the catalytic domain of amylase from Pyrococcus abyssi (PaAD). The insoluble expression of PaAD in E. coli was overcome when the enzyme was expressed in a fusion state (S-PaAD) and culture was cultivated at 18 °C. Moreover, the activity of S-PaAD increased by 1.5-fold as compared to that of PaAD. The ligand binding and enzyme activity assays against different substrates demonstrated that it was more active against 1 % glycogen and amylopectin. The analysis of the hydrolysates through HPLC demonstrated that the enzyme activity is mainly amylolytic, producing longer oligosaccharides as the major end product. The secondary structure analyses by temperature ramping in CD spectroscopy and MD simulation demonstrated the enzymes in the free, as well as fusion state, were stable at 90 °C. The soluble production, thermostability and broad substrate specificity make this enzyme a promising choice for various foods, feed, textiles, detergents, pharmaceuticals, and many industrial applications.

Structural engineering and truncation of α-amylase from the hyperthermophilic archaeon Methanocaldococcus jannaschii.

Alpha amylases catalyse the hydrolysis of α-1, 4-glycosidic bonds in starch, yielding glucose, maltose, dextrin, and short oligosaccharides, vital to various industrial processes. Structural and functional insights on α-amylase from Methanocaldococcus jannaschii were computationally explored to evaluate a catalytic domain and its fusion with a small ubiquitin-like modifier (SUMO). The recombinant proteins' production, characterization, ligand binding studies, and structural analysis of the cloned amylase native full gene (MjAFG), catalytic domain (MjAD) and fusion enzymes (S-MjAD) were thoroughly analysed in this comparative study. The MjAD and S-MjAD showed 2-fold and 2.5-fold higher specific activities (µmol min-1 mg -1) than MjAFG at 95 °C at pH 6.0. Molecular modelling and MD simulation results showed that the removal of the extra loop (178 residues) at the C-terminal of the catalytic domain exposed the binding and catalytic residues near its active site, which was buried in the MjAFG enzyme. The temperature ramping and secondary structure analysis of MjAFG, MjAD and S-MjAD through CD spectrometry showed no notable alterations in the secondary structures but verified the correct folding of MjA variants. The chimeric fusion of amylases with thermostable α-glucosidases makes it a potential candidate for the starch degrading processes.

Catalytic properties of amylases produced by Cunninghamella echinulata and Rhizopus microsporus.

The present work aimed to characterize and compare the catalytic properties of amylases from Cunninghamella echinulata and Rhizopus microsporus. The highest production of amylase by C. echinulata, 234.94 U g-1 of dry substrate (or 23.49 U mL-1), was obtained using wheat bran as a substrate, with 50-55% initial moisture and kept at 28 °C for 48 h. The highest production of amylases by R. microsporus, 224.85 U g-1 of dry substrate (or 22.48 U mL-1), was obtained cultivating wheat bran with 65% initial moisture at 45 °C for 24 h. The optimal activity of the amylases was observed at pH 5.0 at 60 °C for C. echinulata enzymes and at pH 4.5 at 65 °C for R. microsporus. The amylases produced by C. echinulata were stable at pH 4.0-8.0, while the R. microsporus enzymes were stable at pH 4.0-10.0. The amylases produced by C. echinulata remained stable for 1 h at 50 °C and the R. microsporus amylases maintained catalytic activity for 1 h at 55 °C. The enzymatic extracts of both fungi hydrolyzed starches from different plant sources and showed potential for liquefaction of starch, however the amylolytic complex of C. echinulata exhibited greater saccharifying potential.

Efficacy of the Fruit and Vegetable Peels as Substrates for the Growth and Production of α-Amylases in Marine Actinobacteria.

Enzymes from haloalkaliphilic microorganisms have recently focused attention on their potential and suitability in various applications. In this study, the growth and production of extracellular amylases in the marine actinomycetes, using kitchen waste as the raw starch source, have been investigated. Actinobacteria were isolated from the seawater of the Kachhighadi Coast near Dwarika, Gujarat. Seven Actinobacterial isolates of pre-monsoon, monsoon, and post-monsoon seasons belonging to different strains of Nocardiopsis genera were screened and selected for amylase production. The amylase production was initially assessed on the solid media supplemented with the extracts of different fruits and vegetable peels as a substrate by agar plate assay. The strains Kh-2(13), Kh-2(1), and Kh-3(12) produced maximum amylase with potato peel as a substrate, while no significant differences were found with the media containing other peels. Nevertheless, all strains produced amylases at a significant level with other raw substrates as well. For the optimization of the growth and enzyme production, the selected two isolates Kh-2(13) and Kh-3(12) of the monsoon and winter seasons were cultivated in a liquid medium under the submerged fermentation conditions, with potato peel as a substrate. In both organisms, the optimum amylase production was observed in the stationary phase of growth. For amylase production, the effect of different physical and chemical parameters was evaluated. The optimum growth and amylase production was achieved in 2% inoculum size, at pH 8.0, 28℃, and 5% salt concentration. On the basis of the amylase production index (API) (a ratio of the amylase units and cell growth), both isolates produced significant amylase with the only extract of potato peels, without any other supplements. The trends further indicated that while additional complex sources, such as yeast extract and peptone can enhance the cell growth of the actinobacteria, the amylase production remained unaltered. The study projects the significance of waste raw materials for the production of enzymes in extremophilic microorganisms.

Starch-Binding Domain Modulates the Specificity of Maltopentaose Production at Moderate Temperatures.

Maltooligosaccharide-forming amylases (MFAs) hydrolyze starch into maltooligosaccharides with a defined degree of polymerization. However, the enzymatic mechanism underlying the product specificity remains partially understood. Here, we show that Saccharophagus degradans MFA (SdMFA) contains a noncatalytic starch-binding domain (SBD), which belongs to the carbohydrate-binding module family 20 and enables modulation of the product specificity. Removal of SBD from SdMFA resulted in a 3.5-fold lower production of the target maltopentaose. Conversely, appending SBD to another MFA from Bacillus megaterium improved the specificity for maltopentaose. SdMFA exhibited a higher level of exo-action and greater product specificity when reacting with amylopectin than with amylose. Our structural analysis and molecular dynamics simulation suggested that SBD could promote the recognition of nonreducing ends of substrates and delivery of the substrate chain to a groove end toward the active site in the catalytic domain. Furthermore, we demonstrate that a moderate temperature could mediate SBD to interact with the substrate with loose affinity, which facilitates the substrate to slide toward the active site. Together, our study reveals the structural and conditional bases for the specificity of MFAs, providing generalizable strategies to engineer MFAs and optimize the biosynthesis of maltooligosaccharides.

Endometrial glycogen metabolism during early pregnancy in mice.

Glucose is critical during early pregnancy. The uterus can store glucose as glycogen but uterine glycogen metabolism is poorly understood. This study analyzed glycogen storage and localization of glycogen metabolizing enzymes from proestrus until implantation in the murine uterus. Quantification of diastase-labile periodic acid-Schiff (PAS) staining showed glycogen in the glandular epithelium decreased 71.4% at 1.5 days postcoitum (DPC) and 62.13% at DPC 3.5 compared to proestrus. In the luminal epithelium, glycogen was the highest at proestrus, decreased 46.2% at DPC 1.5 and 63.2% at DPC 3.5. Immunostaining showed that before implantation, glycogen metabolizing enzymes were primarily localized to the glandular and luminal epithelium. Stromal glycogen was low from proestrus to DPC 3.5. However, at the DPC 5.5 implantation sites, stromal glycogen levels increased sevenfold. Similarly, artificial decidualization resulted in a fivefold increase in glycogen levels. In both models, decidualization increased expression of glycogen synthase as determine by immunohistochemistry and western blot. In conclusion, glycogen levels decreased in the uterine epithelium before implantation, indicating that it could be used to support preimplantation embryos. Decidualization resulted in a dramatic increase in stromal glycogen levels, suggesting it may have an important, but yet undefined, role in pregnancy.

Effect of chlorogenic acid on the structural properties and digestibility of lotus seed starch during microwave gelatinization.

The structural evolution of lotus starch (LS)-chlorogenic acid (CA) complexes was investigated after microwave-heating treatment, to reveal the relationship between the interactions of lotus starch and chlorogenic acid molecules, and the digestive properties of the starch, after microwave gelatinization. During the early stage of microwave gelatinization (65, 70 °C), CA was mainly participating in the rearrangement of starch molecules in a weakly-bound form, and at that stage, the LS-CA complex acted as an inhibitor of digestion, under small intestine conditions, mainly through the release of CA, which inhibited amylase. However, during the late stage of microwave gelatinization (85 °C), many chlorogenic acid molecules entered the hydrophobic helical cavity of the starch, promoting formation of the V-type starch helical structure in the LS-CA complex, which made a major contribution to inhibiting digestion under oral digestion conditions.

Cascade/Parallel Biocatalysis via Multi-enzyme Encapsulation on Metal-Organic Materials for Rapid and Sustainable Biomass Degradation.

Multiple-enzyme cooperation simultaneously is an effective approach to biomass conversion and biodegradation. The challenge, however, lies in the interference of the involved enzymes with each other, especially when a protease is needed, and thus, the difficulty in reusing the enzymes; while extracting/synthesizing new enzymes costs energy and negative impact on the environment. Here, we present a unique approach to immobilize multiple enzymes, including a protease, on a metal-organic material (MOM) via co-precipitation in order to enhance the reusability and sustainability. We prove our strategy on the degradation of starch-containing polysaccharides (require two enzymes to degrade) and food proteins (require a protease to digest) before the quantification of total dietary fiber. As compared to the widely adopted "official" method, which requires the sequential addition of three enzymes under different conditions (pH/temperature), the three enzymes can be simultaneously immobilized on the surface of our MOM crystals to allow for contact with the large substrates (starch), while MOMs offer sufficient protection to the enzymes so that the reusability and long-term storage are improved. Furthermore, the same biodegradation can be carried out without adjusting the reaction condition, further reducing the reaction time. Remarkably, the simultaneous presence of all enzymes enhances the reaction efficiency by a factor of ∼3 as compared to the official method. To our best knowledge, this is the first experimental demonstration of using aqueous-phase co-precipitation to immobilize multiple enzymes for large-substrate biocatalysis. The significantly enhanced efficiency can potentially impact the food industry by reducing the labor requirement and enhancing enzyme cost efficiency, leading to reduced food cost. The reduced energy cost of extracting enzymes and adjusting reaction conditions minimize the negative impact on the environment. The strategy to prevent protease damage in a multi-enzyme system can be adapted to other biocatalytic reactions involving proteases.

Comparison of functional properties of porous starches produced with different enzyme combinations.

To obtain porous starch granules with higher absorption capacities, three types of enzyme combinations were adopted to modify wheat and maize starches: (1) sequential α-amylase (AA) â†’ glucoamylase (GA); (2) sequential branching enzyme (BE) â†’ GA; and (3) sequential AA→BE→GA. The results indicated that AA→BE→GA treatment had a most optimal influence on porous starches. Compared to AA→GA and BE→GA, the mesopores in wheat starch granules treated with AA→BE→GA decreased by 52.82 and 48.70%, respectively. Conversely, the macropores increased by 216.68 and 138.18%, respectively. While for maize starch, the percentages of mesopores and macropores hardly changed after three enzyme combinations. Comparing the three enzyme treatments showed that pore volume (0.005 and 0.007 cm3/g) and pore size (36.35 and 26.54 nm) were largest in the AA→BE→GA treated wheat and maize starches, respectively. Compared to the AA→GA and BE→GA, the adsorption capacities for oil, dye and heavy metal ions, wheat starch treated with AA→BE→GA increased by 46.61 and 242.33%, and 44.52 and 134.41%, and 28.83 and 271.72%, respectively. Correspondingly, that of maize starch increased by 29.71 and 133.29%, and 42.92 and 79.93%, and 28.16 and 161.43%, respectively. These results may provide a new and valuable enzyme combination for optimising porous starch granules with higher absorption capacities.

Supercritical and ultrasound-assisted extracts from Pleurotus pulmonarius mushroom: chemical profiles, antioxidative, and enzyme-inhibitory properties.

BACKGROUND: This study provides an insight into the impact of ultrasound-assisted extraction with water as solvent (UAEW) and extraction by supercritical carbon dioxide (SC-CO2 ) with 5% EtOH on antioxidant and enzyme inhibitory activity in regard to the chemical profile of the edible and medicinal mushroom, Pleurotus pulmonarius. RESULTS: Extraction efficiency was between 0.36% and 63.32%, depending on the extraction technique. The main compounds in the extracts were fatty acids. Supercritical CO2 extraction with co-solvent was the most suitable method for obtaining extracts that were rich in ergosterol content, reaching a value of 40.1 mg g-1 . The UAEW of crude mushroom powder ensured the highest yield, as well as the extracts with best antioxidative activity. The measurements of enzyme inhibitory activity revealed that all types of investigated extracts exhibited only tyrosinase and amylase inhibition at a significant level. CONCLUSION: Based on our results, the extraction methods significantly affected the chemical profile and bioactivity of P. pulmonarius. © 2020 Society of Chemical Industry.

Crystalloids in FNA specimens of salivary gland lesions: A retrospective study in a single large institute.

BACKGROUND: Identifying crystalloids, which includes amylase and tyrosine crystalloids, is relatively uncommon in salivary gland fine-needle aspiration (FNA) cytology. Although it has been suggested that the presence of crystalloids favors a benign process, the full significance has not been well established. METHODS: The authors performed a review of slides from all salivary gland FNA cases received in their laboratory from January 2017 to September 2019 to identify cases with crystalloids (screened cohort). In addition, the departmental archives were searched retrospectively for all salivary gland FNA cases that had specifically reported crystalloids. Cytologic findings as well as correlation with surgical pathology and clinical follow-up were examined. RESULTS: There were 664 cases in the screened cohort. Crystalloids were present in 37 cases (incidence, 5.6%). Amylase crystalloids were the most commonly identified (n = 28; 75%), followed by tyrosine crystalloids (n = 4; 11%), and collagenous crystalloids (n = 1; 3%). Four cases with crystalloids could not be further classified because of low quantity (n = 4; 11%). An additional 54 cases were identified in the 10-year retrospective review. Diagnostic categorization for the total cohort (N = 91) was as follows: nondiagnostic, 30 cases (33%); nonneoplastic/benign, 42 cases (46%); neoplasm: benign, 10 cases (11%); and atypia of undetermined significance, 9 cases (10%). Twenty-six cases had subsequent resection findings, including oncocytic cyst/cystadenoma in 8 cases (31%), chronic sialadenitis/ductal obstructive change in 7 cases (27%), pleomorphic adenoma in 5 cases (27%), developmental cyst in 3 cases (12%), lymphoepithelial cyst in 2 cases (8%), and Warthin tumor in 1 case (4%). CONCLUSIONS: This cohort represents the largest FNA series of salivary gland crystalloids. All cases were associated with nonneoplastic or benign neoplastic lesions.

Structural and functional modification of kudzu starch using α-amylase and transglucosidase.

The large agglomeration of starch paste in hot water, and fast retrogradation tendency and low transparency of starch gel restrict widespread application of kudzu starch. To improve the above defects, kudzu starch was modified with sequentially α-amylase (AA) and transglucosidase (TG), the latter for varying times. The results indicated that, compared to kudzu starch, amylose content and molecular weight of AA/TG-treated starches reduced by 20.07% and 69.50%, respectively. The proportion of A chain increased by 68.68%, whereas B1, B2 and B3 chains decreased by 14.28%, 48.29% and 23.44%, respectively. The degree of branching dramatically increased by 128.3%. After AA→TG treatment, the changes of starch structure enhanced the functional properties of kudzu starch. The solubility, paste clarity and gelatinization temperature increased, whereas the relative crystallinity, viscosity, storage and loss moduli decreased. Overall, the AA→TG modification would be desirable to improve the functional properties of kudzu starch to expand more large-scale application.

Immobilization of α-amylase on GO-magnetite nanoparticles for the production of high maltose containing syrup.

Robust amylases with stability and catalysis at multitude of extremities are the need of an hour. Enzyme immobilization may prove beneficial at commercial scale to achieve such attributes. In the present study, a commercially available amylase was immobilized on graphene oxide (GO) - magnetite (Fe3O4) nanoparticles through covalent bonding. The structural and morphological characterizations were conducted by XRD, SEM and TEM. Further, FTIR and TGA confirmed the interaction between amylase, GO and nanoparticles. The variables, such as concentrations of GO (1.3 mg), Fe3O4 (58 µg), and amylase (4.5 mg) were optimized by the response surface methodology using central composite design. High loading capacity of 77.58 µg amylase over 1 µg GO-magnetite nanoparticles was achieved under optimum conditions. Biochemically, the pH optimum remained unaltered, i.e., pH 7, whereas, the alkalitolerance was increased by ~20% in relative activities upon immobilization. The half-life of soluble amylase was 13 h, which enhanced to 20 h upon immobilization in 20 mM phosphate buffer, pH 7 at 50 °C. Besides, the thermodynamic parameters supported the stability trends. The immobilized amylase could be used for 11 subsequent cycles. The mentioned attributes and the dextrose equivalent values during the production of high maltose containing syrup highlighted its commercialization.

Biological enzyme treatment of starch-based lithium-ion battery silicon-carbon composite.

Silicon/carbon composites have the disadvantages of large volume expansion and high cost, which limits their commercial application. In this study, green and economic starch was used to prepare porous starch (PS) under the action of enzymes, and then nano-silica was embedded in the PS. A PS based carbon/silicon/carbon composite was prepared by coating and carbonizing the starch slurry, which can alleviate the volume expansion of silicon. The results show that the anode composite material with 20% silicon content has a high initial capacity of 869 mAh g-1 and an initial Coulombic efficiency of 66% at 0.2 A g-1, and the specific capacity is maintained 450 mAh g-1 after 100 cycles. When the silicon content reaches 30%, the reversible capacity of the composite is 1490 mAh g-1 at a current density of 0.2 A g-1, and the capacity remains 850 mAh g-1 after 100 cycles. Its excellent properties and stability are attributed to the abundant porosity of the carbon in the starch derived layer, which improves the structural stability and electrochemical kinetics. This method provides a reference for the sustainable and environmental protection of lithium-ion battery anode materials.

In Vitro Prebiotic Effects of Malto-Oligosaccharides Containing Water-Soluble Dietary Fiber.

This study measured the proliferative activity of malto-oligosaccharide (MOS) as a prebiotic against Bifidobacteria, resistance to digestion in vitro, and changes during in vitro fermentation by human fecal microorganisms. It consisted of 21.74%, 18.84%, and 11.76% of maltotriose, maltotetraose, and maltopentaose produced by amylase (HATT), respectively. When 1% of MOS was added to a modified PYF medium as the carbon source, proliferation of Bifidobacterium breve was increased significantly. During the in vitro digestion test, MOS was partially degraded by intestinal enzymes. Fermentation characteristics by human fecal microorganisms were evaluated by adding 1% galacto-oligosaccharide (GOS), as well as 1% and 2% MOS as carbon sources to the basal medium, respectively. In comparison with the addition of 1% of MOS and GOS, the total short chain fatty acid (SCFA) content increased over time when 2% of MOS was added. The species diversity and richness of intestinal microbiota increased significantly with 2% MOS compared to those with 1% GOS. In addition, the 2% addition of MOS reduced intestinal pathobiont microorganisms and increased commensal microorganisms including Bifidobacterium genus. Collectively, MOS produced by amylase increased the SCFA production and enhanced the growth of beneficial bacteria during in vitro fermentation by human fecal microbiota.

Dietary Wheat Amylase Trypsin Inhibitors Impact Alzheimer's Disease Pathology in 5xFAD Model Mice.

Wheat amylase trypsin inhibitors (ATIs) represent a common dietary protein component of gluten-containing cereals (wheat, rye, and barley). They act as toll-like receptor 4 ligands, and are largely resistant to intestinal proteases, eliciting a mild inflammatory response within the intestine after oral ingestion. Importantly, nutritional ATIs exacerbated inflammatory bowel disease and features of fatty liver disease and the metabolic syndrome in mice. For Alzheimer's disease (AD), both inflammation and altered insulin resistance are major contributing factors, impacting onset as well as progression of this devastating brain disorder in patients. In this study, we evaluated the impact of dietary ATIs on a well-known rodent model of AD (5xFAD). We assessed metabolic, behavioral, inflammatory, and microbial changes in mice consuming different dietary regimes with and without ATIs, consumed ad libitum for eight weeks. We demonstrate that ATIs, with or without a gluten matrix, had an impact on the metabolism and gut microbiota of 5xFAD mice, aggravating pathological hallmarks of AD. If these findings can be translated to patients, an ATI-depleted diet might offer an alternative therapeutic option for AD and warrants clinical intervention studies.

Effects of high-amylase corn on performance and carcass quality of finishing beef heifers.

Developed initially for use in fuel ethanol production, Enogen Feed Corn (EFC; Syngenta Crop Protection) is genetically modified to express high concentrations of α-amylase in the corn kernel. Experiments were conducted to evaluate processing characteristics of EFC, in vitro digestion, and effects on feedlot performance, carcass characteristics, and liver abscess incidence. Experiment 1 used a randomized complete block design (3 × 3 × 5 factorial) to evaluate starch availability, in situ dry matter disappearance (ISDMD), in vitro gas production (IVGP), and volatile fatty acid (VFA) profiles of in vitro cultures. Grains (EFC or mill-run control [CON]) were flaked to a density of 360 g/L, and mixtures with 0%, 25%, 50%, 75%, or 100% EFC were prepared. Grains were tempered with added moisture (0%, 3%, or 6%) prior to steam conditioning for 15, 30, or 45 min. No two- or three-way interactions were observed. Adding moisture improved starch availability (linear; P < 0.01), and tended to improve ISDMD (linear, P = 0.06). Steam conditioning for 30 min improved starch availability, IVGP, and production of acetate, propionate, butyrate, valerate, and total VFA (P < 0.01) compared with conditioning for 15 or 45 min. Starch availability, ISDMD, IVGP, acetate, propionate, valerate, and total VFA production increased with an increasing proportion of EFC (linear, P < 0.01). Experiment 2 used 700 beef heifers (394 ± 8.5 kg initial body weight [BW]) fed finishing diets with steam-flaked corn as CON or EFC for 136 d. Targeting similar starch availabilities, grains were processed to 360 g/L (CON) and 390 g/L for CON and EFC, respectively. Heifers were blocked by BW, stratified, and then randomly assigned to 28 dirt-surfaced pens (25 animals per pen). Dry matter intakes were similar between treatments (P = 0.78), but cattle fed EFC had greater average daily gain (P < 0.01), improving feed efficiency by 5% (P < 0.01). Hot carcass weight was 6 kg greater for EFC cattle (P <0.01) than CON. No differences were observed for longissimus muscle area (P = 0.89), 12th-rib fat thickness (P = 0.21), or USDA yield grade (P = 0.13). Cattle fed CON had greater marbling scores than EFC (P = 0.04), but this did not affect the USDA quality grade (P > 0.33). Cattle fed EFC had 23% fewer abscessed livers than CON (P = 0.03). High-amylase corn may be used to improve microbial digestion, mill-throughput, and cattle performance, and it may mitigate liver abscesses.

Morphology, structure, properties and applications of starch ghost: A review.

Starch ghost, an insoluble structure of gelatinized starch, plays an important role in the applications of starch. In this review, we summarized the preparation, morphology, structure, properties and applications of starch ghost. The preparation steps of starch ghost include gelatinization, purification and preservation, and many factors influence the yield of starch ghost. The morphology and content of starch ghost can be influenced by many factors like starch resource and amylose content. Ghosts from non-waxy starches are composed of amylopectin with long branch-chains and amylose. These molecules cross-link to each other to reinforce the structure, and tend to form B-type double helix in ghosts from high-amylose starches. Some surface proteins that bind tightly to starch granules are also present in starch ghost. Protein and lipid are thought to have limited effects on the structural stability, but they make a big difference in the morphology of starch ghost. Starch ghost shows a different resistance to amylase among various starches, but it can be further digested under the high shear force. The mechanical, enzymatic hydrolysis and electrochemical properties of starch ghost make it widely used as emulsifier, stabilizer, thickener and starch-based films or gels in food and non-food processing industries.

Effect of amylolysis on the formation, the molecular, crystalline and thermal characteristics and the digestibility of retrograded starches.

This study evaluated the effect of amylases on the formation, and characteristics of retrograded starches using sweet potato (SPS), cassava (CAS) and high amylose maize (HAS) starches. The starches were gelatinized, hydrolyzed with fungal or maltogenic α-amylase, de-branched and retrograded. The modified starches were then analyzed for digestibility, chain size distribution, relative crystallinity and crystallite size, thermal properties and the proportion of double helices. CAS was the most susceptible and HAS the most resistant to the action of both enzymes. Amylolysis was efficient in forming resistant starch type 3 (RS3) and high levels (> 60%) were found for all starches. RS3 content was highly correlated with the proportion of chains with degrees of polymerization between 13 and 30 for all starches, especially for the root starches, while for HAS, the high amylose content and reduction in the size of amylose chains and very long amylopectin chains also deeply contributed for the RS3 formation. These sizes (DP 13-30) are best suited for the formation of a more crystalline, more perfect, and more strongly bonded structure, composed of larger crystallites, and with a higher concentration of double helices. High correlation coefficients were found between RS3, relative crystallinity, crystallites size, and enthalpy change.